We ship !

We are not shipping goods to USA
except BioBeam 940

How to us

Treatment

 

 Apply a low dose of red light during a 4.5 minute treatment session. Use the BioNase treatment on a regular basis, starting with a minimum of 3 times daily in order to ensure optimal control of Rhinitis symptoms.
Once symptoms are relieved, reduce the number of treatment sessions and use as needed. The BioNase may be used as either the sole treatment or as a supplement to existing treatments.

Treatment

Operating Instructions

 

  • In order to operate the BioNase, insert a 9V alkaline battery into the control unit (1).
  • Plug the cord (2) into the control unit.
  • Push the bottom of the nasal insert in order to spread apart the light source before inserting it into your nostrils (3&4).
  • Comfortably place the double light source (5&6) into your nostrils as deep as possible and press the "on" button. (7).
  • Treatment is completed once the green light indicator on the control unit (8) automatically turns off (after 4.5 minutes).

Cleaning

    
Cleaning: Light sources can be cleaned with a damp cloth and mild soap. Avoid immersing light sources in water.
 
Disinfecting: Light sources can be wiped with a cloth dampened with 70% Ethanol.
 
Hygienic Protection: In order to keep conditions as hygienic as possible, do not lend the nasal light source to other sufferers.

Product’s Specification

  

Light Treatment - Narrow band 630 nm light
Illumination Power - Minimum 4.5 mW for each nostril
Timer - Push-button operated automatically turns off after 4.5 minutes
Timer Accuracy - 10% deviation
Active LED - Green LED lights up when unit is on.
Power Source - 9V Alkaline Battery
Battery Lifetime - Approximately 100 treatments
Low Battery Indication - Active LED flashes
Control Unit Weight - 120 g with battery 70 g without battery
Control Unit Size - 90x65x30 mm


How to us

Treatment

 

 Apply a low dose of red light during a 4.5 minute treatment session. Use the BioNase treatment on a regular basis, starting with a minimum of 3 times daily in order to ensure optimal control of Rhinitis symptoms.
Once symptoms are relieved, reduce the number of treatment sessions and use as needed. The BioNase may be used as either the sole treatment or as a supplement to existing treatments.

Treatment

Operating Instructions

 

  • In order to operate the BioNase, insert a 9V alkaline battery into the control unit (1).
  • Plug the cord (2) into the control unit.
  • Push the bottom of the nasal insert in order to spread apart the light source before inserting it into your nostrils (3&4).
  • Comfortably place the double light source (5&6) into your nostrils as deep as possible and press the "on" button. (7).
  • Treatment is completed once the green light indicator on the control unit (8) automatically turns off (after 4.5 minutes).

Cleaning

    
Cleaning: Light sources can be cleaned with a damp cloth and mild soap. Avoid immersing light sources in water.
 
Disinfecting: Light sources can be wiped with a cloth dampened with 70% Ethanol.
 
Hygienic Protection: In order to keep conditions as hygienic as possible, do not lend the nasal light source to other sufferers.

Product’s Specification

  

Light Treatment - Narrow band 630 nm light
Illumination Power - Minimum 4.5 mW for each nostril
Timer - Push-button operated automatically turns off after 4.5 minutes
Timer Accuracy - 10% deviation
Active LED - Green LED lights up when unit is on.
Power Source - 9V Alkaline Battery
Battery Lifetime - Approximately 100 treatments
Low Battery Indication - Active LED flashes
Control Unit Weight - 120 g with battery 70 g without battery
Control Unit Size - 90x65x30 mm


 

 

$69.95

 

 

 

$69.95